Two required per console

• Colour: silber / grey
• ConSole 4.2, 5.2, 6.2 and CS+
• Compatible with: 520042-K, 520052-K, 520062-K, 520075-K
• Technical Data:
• Material: Aluminium EN-AW-6063 T6
• Weight: 0,203 kg
• Material thicknesss 2 mm

Description: Replacement part for attachment rail to ConSole

• Applicational Data: ConSole 4.1, 4.2, 5.2, 6.2 and CS+
• Material: Stainless steel
• Dimensions: 65,8 x 18 x 17,8 mm
• Weight: 0,031 kg
• Compatible: 400004, 400005, 520041-K, 520042-K, 520052-K, 520062-K, 520075-K
• Components: 4 x ConSole Clip; 4 x Hexag. screw DIN7504-ST5,5x25-A2-SW8

Description: To be used on the back row of an installation of ConSole + to reduce the windload and thus ballast required

• Material: HDPE
• Dimensions: 1533 x 448 x 361
• Weight: 8,406 kg
• Compatible: 520075-K
• Components: 1 x Streamliner+, 9 x Hexag. screw DIN7504-ST5,5x25-A2-SW8

The ConSole+ provides an angle of 15 degrees.

• The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration.
• Most commercially available framed standard PV modules fit the ConSole+.
• The ConSole+ is weighed down with ballast e.g. gravel, paving slabs, etc... in order to resist the windloads.
• The necessary weight of the ballast depends on the height of the building, its location and the condition of the ground and the wind and snow loads.
• Reference values for the necessary ballasts are contained in "Preparing the Assembly - Point 2" in the table of Page 5 of the installation manual.
• Details:
• Colour: Black
• Suitable for flat-roof- and ground mounting installations
• For framed PV-modules
• Technical Data:
• Material: HDPE, Aluminium and stainless steel
• Weight: 7,900 kg
• Max# module length: 1580-1730 mm
• Holes gap - width: 895-1014 mm
• Holes gap - length: 690-1180 mm
• Other Contents:
• 1 x 500075 ConSole+
• 2 x 400005 ConSole U-Profile 1035 mm
• 4 x 900027 Hexag# screw DIN933-M6x20 A2-70
• 4 x 900028 Washer DIN9021-6,4-A2
• 4 x 900029 Self-locking hexag# nut DIN985-M6-A2
• 4 x 900106 ConSole Clip
• 4 x 900115 Hexag# screw DIN7504-ST5,5x25-A2-SW8

Description: Rail suitable for attachment modules to ConSole

• Applicational Data: ConSole 4.1, 4.2, 5.2 and 6.2
• Material: Aluminium
• Dimensions: 150 x 25 x 12 mm
• Weight: 0,034 kg
• Compatible: 400004, 400005, 520041-K, 520042-K, 520052-K, 520062-K
• Components: 2 x Elongation rail, 4 x Hexag. screw DIN933-M6x20 A2-70, 4 x Washer DIN9021-6,4-A2, 4 x Self-locking hexag. nut DIN985-M6-A2