notice: For all official information and updates regarding COVID-19, visit the South African Department of Health's website at www.SAcoronavirus.co.za
The Right Product First Time, Every Time

MPPT Charge Controller

5 Item(s)

  • EPSolar eTracer 6415BND 150V/60A MPPT Charge Controller - 12V/24V/48V

    New eTracer is an industrial grade product with advanced Maximum Power Point Tracking (MPPT) algorithm. It can deliver the maximum available power for charging batteries and charge a lower nominal voltage battery from a higher nominal voltage array. And can be applied in the off-grid PV systems up to 3KW. The die-cast aluminum design ensures excellent heat dispersion. Peak conversion efficiency of 98% and full load efficiency of 97% Battery type selection: Sealed, Gel, Flooded and User(programmable) Battery temperature compensation Built-in running data and event logging Real-time data monitoring and parameters setting with MT50, APP or PC software PV over current protection PV short circuit protection PV reverse polarity protection Battery over voltage protection Battery reverse polarity protection Controller overheating protection

    R5,530.39 excl. VAT R6,359.95 incl. VAT
  • EPSolar Tracer 1210AN 10A MPPT Charge Controller - 12V/24V

    The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Features: Advanced MPPT technology, with efficiency no less than 99.5% Ultra-fast tracking speed and guaranteed tracking efficiency Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time Wide MPP operating voltage range High quality components, perfecting system performance, with maximum conversion efficiency of 98% Accurate recognition and tracking of multiple-peaks maximum power point International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life Charging power and current limitation function Compatible with lead-acid and lithium-ion batteries Battery temperature compensation function?only for Lead-acid battery? Real-time energy statistics function Overheating power reduction function Multiple load work modes The communication port adopts professional protection chip With RS-485 communication bus interface and Modbus communication protocol. Monitor and set the parameters via mobile phone APP or PC software Full-load operation without any drop in capacity within the range of working environment temperature Extensive electronic protection

    R817.35 excl. VAT R939.95 incl. VAT
  • EPSolar Tracer 2210CN 20A MPPT Charge Controller - 12V/24V

    Tracer BN series is EPsolar’s second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion. Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed. Maximum conversion efficiency of 98% Accurately recognizing and tracking of multiple power points Wide MPP operating voltage range Die-cast aluminum design, ensuring excellent heat dissipation characteristic Multiple load control modes: manual control, light ON/OFF, light On+Timer and time control. Battery temperature compensation function. Real-time energy statistics function. PV short circuit protection PV over current protection PV reverse polarity protection Battery over voltage protection Battery over discharge protection Battery reverse polarity protection Load overload protection Load short circuit protection Battery overheating protection Controller overheating protection

    R791.26 excl. VAT R909.95 incl. VAT
  • EPSolar Tracer 4210AN 40A MPPT Charge Controller - 12V/24V

    The Tracer AN series. Based on common negative design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. Features: Advanced MPPT technology, with efficiency no less than 99.5% Ultra-fast tracking speed and guaranteed tracking efficiency Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time Wide MPP operating voltage range High quality components, perfecting system performance, with maximum conversion efficiency of 98% Accurate recognition and tracking of multiple-peaks maximum power point International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life Charging power and current limitation function Compatible with lead-acid and lithium-ion batteries Battery temperature compensation function?only for Lead-acid battery? Real-time energy statistics function Overheating power reduction function Multiple load work modes The communication port adopts professional protection chip With RS-485 communication bus interface and Modbus communication protocol. Monitor and set the parameters via mobile phone APP or PC software Full-load operation without any drop in capacity within the range of working environment temperature Extensive electronic protection

    R1,834.74 excl. VAT R2,109.95 incl. VAT
  • MLT Nomad Dual Tracker MPPT Charge Controller

    The Nomad MPPT was designed to help minimise total photo-voltaic system capital and lifetime operational costs, through a variety of innovations. - 24 hour history display of solar power production (both ports) & battery voltage SOC, and most recent PV voltage / power sweeps (both ports) - Full colour touch screen 4.3 inch LCD - Full remote monitoring, control & notification with optional Bridge - 150 days daily kWh production and peak kW, 64 events, lifetime kWh production - Dual high DC voltage MPPTs. - Integrated protection. - Easy installation & configuration. - High reliability. - Compatible with various battery types. - UART TTL, USB, RS485 (optional), CAN (optional)

    R6,373.87 excl. VAT R7,329.95 incl. VAT
MPPT Charge Controller
Minimal Price: R791.26

please wait...