Image of Netgear M4100-50G 48-Port Gigabit Ethernet Managed L2+ Switch GSM7248-200EUS

Picture shown is only for illustration purposes and Weable may not be held accountable for any errors this image may contain.

Netgear M4100-50G 48-Port Gigabit Ethernet Managed L2+ Switch

Availability: Confirm Stock With Weable Team Before Ordering

GSM7248-200EUS

NEED TO ORDER, READ HERE IF YOU GET STUCK

Requests Confirmed and Paid before 1pm will be Processed 14 June 2021, Monday

R10,226.04 excl. VAT R11,759.95 incl. VAT
 
M4100-50G, 48 Port 10/100/1000 Gigabit Ethernet L2+ Switch; 4x SFP(shared) slots for Fibre modules.
Weable Sales Team Support
Weable Live Support
Weable Team Call Request
Create Ticket for Sales or Support

Product Description

Up to 48 Switches Can Be Managed Via a Single IP Address!
NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 or 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP) gigabit interfaces. Layer 2 management functionality delivers reliability, control, and availability. Static routing enables inter-VLAN routing and provides a faster network and more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based QoS provides enhanced traffic management capabilities. The cost-effective NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch creates a more productive — and future-proof — network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today’s high-performance environments.

Multiple NETGEAR fully managed switches can be managed via a single IP address. Optimize bandwidth, security, and control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth and throughput.

Powerful
Full 24 or 48 10/100/1000 ports and a non-blocking design provide wire speed throughput and maximum bandwidth for the most demanding network environments. Small form-factor pluggable (SFP) modules deliver choice in 1000BASE-SX, 1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer 2 management features optimize bandwidth throughout the network – delivering Gigabit performance to systems, applications, and services. Take advantage of forwarding rates up to 71.4 million pps, and a switching capacity of 96 Gbps.

Easy to Use
Move up to Gigabit power in minutes. Use either of these solutions as a managed switch out of the box – just plug and play! All ports are auto-negotiating and support Auto Uplink™ technology. Choose from two easy-to-use management interface options –Web interface or a command line interface available through console or telnet. Comprehensive remote administration capabilities reduce the need for on-site administration. Easy to troubleshoot – built-in testing capability locates cable-related network problems. Additionally, up to 48 switches can be managed via a single IP address using the Web GUI interface.

Manageable
Meet your management needs with SNMP (v1, v2c and v3), RMON, Command Line Interface (CLI) and completely redesigned Web-based GUI, ProSafe Control Center. Advanced features include up to 512 VLANs, DiffServ traffic prioritization and 802.1p (QoS) for Voice over IP services (VoIP), broadcast storm protection, RADIUS, 802.1x, port trunking, Rapid Spanning Tree, and link aggregation. In addition, L2-L4 based ACLs provide robust security, while static routing enables inter-VLAN routing for effective bandwidth management. Full Layer 2 implementation allows you to configure your network for maximum performance, reliability, and availability. Manageable with any popular SNMP-based management software, but optimized for NETGEAR ProSafe Network Management Software NMS100.

Outstanding
These products offer Layer 2 management and full Gigabit power at a compelling price. Use at the edge to improve workgroup connections, or at the core to upgrade a Gigabit Ethernet backbone — now you can afford the power your network deserves. Like all NETGEAR products, everything you need is in the box – including rack-mount kit, power and serial cables, and more.

 

Product Specifications

 

Ports & interfaces
Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-T
SFP/SFP+ slots quantity 4
Gigabit Ethernet (copper) ports quantity 48
Console port RS-232
Basic switching RJ-45 Ethernet ports quantity 48
Networking
Flow control support Yes
Port mirroring Yes
Link aggregation Yes
Broadcast storm control Yes
Rate limiting Yes
DHCP client Yes
DHCP server Yes
IGMP snooping Yes
Spanning tree protocol Yes
Networking standards IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Power
Input voltage 12
Operational conditions
Operating relative humidity (H-H) 0 - 90%
Operating altitude 0 - 3000 m
Operating temperature (T-T) 0 - 55 °C
Storage temperature (T-T) -20 - 70 °C
Storage relative humidity (H-H) 0 - 95%
Operating temperature (T-T) 32 - 131 °F
Weight & dimensions
Weight 4.15 kg
Security
MAC address filtering Yes
Access Control List (ACL) Yes
SSH/SSL support Yes
Data transmission
MAC address table 8000 entries
Supported data transfer rates 10/100/1000 Mbps
Maximum data transfer rate 1 Gbit/s
Jumbo frames support Yes
Number of queues 8
Store-and-forward Yes
Number of VLANs 1024
Management features
MIB support RFC 1213, RFC 1493, RFC 1643
Switch layer L2+
Quality of Service (QoS) support Yes
Multicast support Yes
Web-based management Yes
Switch type Managed
Protocols
Management protocols SNMPv1, v2c, v3, IGMP v1, v2, v3, DHCP
Data link protocols Ethernet, Fast Ethernet, Gigabit Ethernet
Supported network protocols SNTP, RMON 1, 2, 3, 9, BOOTP, HTTP & HTTPS, LLDP, LLDP-MED, GARP, GVRP, GMRP, TFTP, SFTP, SCP
Other features
Latency 20 us
Dimensions (WxDxH) 440 x 205 x 43 mm
Power supply 71.5 W
Connectivity technology Wired
Bandwidth 48 Gbit/s
Electromagnetic emissions CE, EN 55022 Class A, EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick
Networking features Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity LEDs Y
Weight 9.13
Dimensions (W x D x H) 439.4 x 205.7 x 40.6 mm (17.3 x 8.1 x 1.6")
Power over Ethernet (PoE)
Power over Ethernet (PoE) No
Design
Rack mounting Yes
Safety CE, EN 60950-1, UL/cUL 60950-1
Performance
Internal memory 128 MB
Flash memory 32 MB
Stackable No
Noise level 48.8 dB
Firmware upgradeable Yes
Packet buffer memory 0.75 MB

Additional Information

Description

Up to 48 Switches Can Be Managed Via a Single IP Address!
NETGEAR delivers wirespeed Gigabit performance and a full set of Layer 2 management features, as well as static routing with unsurpassed affordability. This next-generation, high-speed switch delivers maximum throughput where you need it — to high-performance workgroups at the edge of the network, or as a backbone for Fast Ethernet switches and high-speed servers in demanding small networks. The non-blocking design offers full Gigabit throughput simultaneously to all 24 or 48 10/100/1000 ports to ensure reliable performance. Flexible fiber connectivity is enabled through four combination small form-factor pluggable (SFP) gigabit interfaces. Layer 2 management functionality delivers reliability, control, and availability. Static routing enables inter-VLAN routing and provides a faster network and more effective bandwidth management. Access control lists (L2-L4) provide robust security, while L2-L4 based QoS provides enhanced traffic management capabilities. The cost-effective NETGEAR ProSafe 24- and 48-port Gigabit L2 Managed Switch creates a more productive — and future-proof — network. With increasing bandwidth requirements from applications such as voice, video, database management, and other services that slow throughput and response time, you can unleash your network and enable maximum productivity with Gigabit Ethernet for today’s high-performance environments.

Multiple NETGEAR fully managed switches can be managed via a single IP address. Optimize bandwidth, security, and control with full Layer 2 management capabilities. Network administrators can use any combination of these features to ensure uptime, availability, bandwidth and throughput.

Powerful
Full 24 or 48 10/100/1000 ports and a non-blocking design provide wire speed throughput and maximum bandwidth for the most demanding network environments. Small form-factor pluggable (SFP) modules deliver choice in 1000BASE-SX, 1000BASE-LX or 1000BASE-ZX (70Km) optics. The Layer 2 management features optimize bandwidth throughout the network – delivering Gigabit performance to systems, applications, and services. Take advantage of forwarding rates up to 71.4 million pps, and a switching capacity of 96 Gbps.

Easy to Use
Move up to Gigabit power in minutes. Use either of these solutions as a managed switch out of the box – just plug and play! All ports are auto-negotiating and support Auto Uplink™ technology. Choose from two easy-to-use management interface options –Web interface or a command line interface available through console or telnet. Comprehensive remote administration capabilities reduce the need for on-site administration. Easy to troubleshoot – built-in testing capability locates cable-related network problems. Additionally, up to 48 switches can be managed via a single IP address using the Web GUI interface.

Manageable
Meet your management needs with SNMP (v1, v2c and v3), RMON, Command Line Interface (CLI) and completely redesigned Web-based GUI, ProSafe Control Center. Advanced features include up to 512 VLANs, DiffServ traffic prioritization and 802.1p (QoS) for Voice over IP services (VoIP), broadcast storm protection, RADIUS, 802.1x, port trunking, Rapid Spanning Tree, and link aggregation. In addition, L2-L4 based ACLs provide robust security, while static routing enables inter-VLAN routing for effective bandwidth management. Full Layer 2 implementation allows you to configure your network for maximum performance, reliability, and availability. Manageable with any popular SNMP-based management software, but optimized for NETGEAR ProSafe Network Management Software NMS100.

Outstanding
These products offer Layer 2 management and full Gigabit power at a compelling price. Use at the edge to improve workgroup connections, or at the core to upgrade a Gigabit Ethernet backbone — now you can afford the power your network deserves. Like all NETGEAR products, everything you need is in the box – including rack-mount kit, power and serial cables, and more.

 

Product Specifications

 

Ports & interfaces
Copper ethernet cabling technology 1000BASE-T, 100BASE-TX, 10BASE-T
SFP/SFP+ slots quantity 4
Gigabit Ethernet (copper) ports quantity 48
Console port RS-232
Basic switching RJ-45 Ethernet ports quantity 48
Networking
Flow control support Yes
Port mirroring Yes
Link aggregation Yes
Broadcast storm control Yes
Rate limiting Yes
DHCP client Yes
DHCP server Yes
IGMP snooping Yes
Spanning tree protocol Yes
Networking standards IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Power
Input voltage 12
Operational conditions
Operating relative humidity (H-H) 0 - 90%
Operating altitude 0 - 3000 m
Operating temperature (T-T) 0 - 55 °C
Storage temperature (T-T) -20 - 70 °C
Storage relative humidity (H-H) 0 - 95%
Operating temperature (T-T) 32 - 131 °F
Weight & dimensions
Weight 4.15 kg
Security
MAC address filtering Yes
Access Control List (ACL) Yes
SSH/SSL support Yes
Data transmission
MAC address table 8000 entries
Supported data transfer rates 10/100/1000 Mbps
Maximum data transfer rate 1 Gbit/s
Jumbo frames support Yes
Number of queues 8
Store-and-forward Yes
Number of VLANs 1024
Management features
MIB support RFC 1213, RFC 1493, RFC 1643
Switch layer L2+
Quality of Service (QoS) support Yes
Multicast support Yes
Web-based management Yes
Switch type Managed
Protocols
Management protocols SNMPv1, v2c, v3, IGMP v1, v2, v3, DHCP
Data link protocols Ethernet, Fast Ethernet, Gigabit Ethernet
Supported network protocols SNTP, RMON 1, 2, 3, 9, BOOTP, HTTP & HTTPS, LLDP, LLDP-MED, GARP, GVRP, GMRP, TFTP, SFTP, SCP
Other features
Latency 20 us
Dimensions (WxDxH) 440 x 205 x 43 mm
Power supply 71.5 W
Connectivity technology Wired
Bandwidth 48 Gbit/s
Electromagnetic emissions CE, EN 55022 Class A, EN 55024, FCC Part 15 Class A, VCCI Class A, C-Tick
Networking features Ethernet, Fast Ethernet, Gigabit Ethernet
Connectivity LEDs Y
Weight 9.13
Dimensions (W x D x H) 439.4 x 205.7 x 40.6 mm (17.3 x 8.1 x 1.6")
Power over Ethernet (PoE)
Power over Ethernet (PoE) No
Design
Rack mounting Yes
Safety CE, EN 60950-1, UL/cUL 60950-1
Performance
Internal memory 128 MB
Flash memory 32 MB
Stackable No
Noise level 48.8 dB
Firmware upgradeable Yes
Packet buffer memory 0.75 MB
Model no GSM7248-200EUS

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.

What would you like to know?

Is there stock available?
Provide me with better pricing on big quantities?
I'd like an official quote please?
Found it cheaper ( We will request a valid quote, not more than 2 days old, showing the price and availability )
I'd like more info on this product please?

Complete the following to receive your answer.

  • Change